MSI RTX 4070 Super Gaming X Slim in SSUPD Meshlicious ITX Analysis
Building a high-density vertical Small Form Factor (SFF) PC in the SSUPD Meshlicious requires precision alignment of GPU length, standoff positions, and display output cable clearance. The MSI GeForce RTX 4070 Super 12G Gaming X Slim offers a slim 46 mm (2.3-slot) profile that simplifies internal placement within this mesh enclosure.
Dimensional Matrix & Structural Envelope
The table below summarizes the compatibility metrics between the MSI Gaming X Slim card and the SSUPD Meshlicious SFF chassis:
| Dimension Parameter | Hardware Specification | Chassis Boundary | Net Margin / Clearance State |
|---|---|---|---|
| GPU Card Length | 307.0 mm | 336.0 mm Max Vertical Height | +29.0 mm Vertical Buffer |
| GPU Thickness | 46.0 mm (2.3-Slot) | 60.0 mm (3-Slot Mode Allowance) | +14.0 mm Mesh Panel Buffer |
| GPU Width | 125.0 mm | 155.0 mm Internal Cavity Width | +30.0 mm Internal Clearance |
| DisplayPort Cable Clearance | Right-Angle Cable Required | Bottom Chassis Clearance (~20mm) | Requires 90-Degree Adapter Cables |
Chassis Standoff Mode & 3-Slot Configuration
The SSUPD Meshlicious features a modular vertical mounting spine that can be positioned in 3-slot GPU mode or 4-slot GPU mode. Measuring 46 mm thick (2.3 slots), the MSI Gaming X Slim fits cleanly in standard 3-slot mode. This leaves a 14 mm air gap between the shroud fans and the side mesh panel, allowing cold air intake across the entire heatsink array.
Standard 3-slot mode retains 73 mm of CPU cooler height clearance on the opposing side of the spine. When pairing this setup with compact socket layouts on B760I Mini-ITX motherboards, builders can easily route internal cables through the spine cutouts without pinching the main PCIe riser assembly.
GPU Vertical Length & Bottom Cable Clearance
In the Meshlicious, graphics cards mount vertically with display output ports facing straight down toward the desk. The MSI Gaming X Slim measures 307 mm in length, fitting well inside the case limit of 336 mm with a 29 mm top margin.
However, bottom port clearance requires attention. Standard straight DisplayPort and HDMI cable connectors collide with the desk surface underneath the chassis floor pan. To connect external monitors cleanly, builders must use right-angle (90-degree) DisplayPort/HDMI adapter cables or elevate the chassis using aftermarket case feet to gain at least 30 mm of bottom clearance.
Power Infrastructure & Cable Routing
The RTX 4070 Super Gaming X Slim operates with a 245W TBP, exhibiting brief transient load spikes up to 320W. Pairing this card with compact SFX 650W ATX 3.0 power supplies delivers efficient, stable power via native 12VHPWR cabling.
The 16-pin power connector on the Gaming X Slim is recessed into the top edge of the PCB. Route the 12VHPWR cable cleanly behind the motherboard tray through the central spine cutout, avoiding contact with front cooling fans or front-mounted 280mm AIO coolers.
Builder Summary
- Vertical GPU Fit: PASSED — 29 mm length margin to top panel.
- Side Panel Clearance: PASSED — 14 mm gap to mesh panel in 3-slot mode.
- Display Cables: MANDATORY — Must use 90-degree right-angle DP/HDMI cables or extended feet to clear bottom floor pan.
- Cross-System Compatibility: For adjacent component clearances, review our analysis on Asrock motherboard VRM and slot layout.